wallys 2022年12月5日 14:12 阅读 264 评论 0 Industrial wifi6 Wireless AP/DR AP6018 S AIPQ6010 2T2R supporting QCN9074 wifi moudle Industrial wifi6 Wireless AP/DR AP6018 S AIPQ6010 2T2R supporting QCN9074 wifi moudle DR-AP-6018-S-A QCN9074 WiFi Card IPQ6010,802.11ax,2x2 2.4G&5G, Support OpenWRT Description DR-AP6018-S-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018-S (IPQ6010) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure. Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface ■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 133x 128 x 44 mm ■ Aluminum alloy material ■ Two Version: DR-AP6018-S-AB (color black) DR-AP6018-S-AO (color orange) ■ Support Wally DR6018-S Absolute Maximum Rating Parameter Rating Unit Supply Voltage 24V~48V(DC Jack) V Operating Temperature Range -40 to +70 ºC Storage Temperature Range -45 to +105 ºC Operating Humidity Range 5 to +95 (non-condensing) % Hardware Specifications Symbol Parameter CPU Qualcomm-Atheros IPQ6010 CPU Frequency Quad-core ARM 64 bit A53 @1.8 GHz processor System Memory 1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design Ethernet Port 1 x 1Gbps Ethernet Ports & POE 1x 1Gbps Ethernet Ports NGFF Slot M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0(For WiFi Module) SD Card Slot 1x SD Card Slot(Option) USB /header 1x USB 3.0 Port(Option) POE 24V~48V passive POE/Active POE(Suport 802.3bt) DC Jack 24V~48V power supply LED header 2.0 pitch pin header Serial Port 1x Serial Port 4 Pin Connector Wireless On-board 2x2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax, max 23dBm per chain On-board 2x2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax, max 20dBm per chain 4 x MMCX Connectors Nor Flash 8MB Nand Flash 256MB DDR 256MB~512MB Dimension 133mm x 128mm x 44mm Boot Config Switch Boot_Config Switch1(S7) Boot_Config Boot up InterfaceSelect S7A S7B S7C 0 0 0 SPI NOR. (Default) 0 0 1 eMMC 0 1 0 QPIC, Parallel NAND 0 1 1 USB3.0 1 0 0 SPI-NOR-GPT S7D Boot up InterfaceSelect 0 Boot from code ram.(Default) 1 Boot from ROM Boot_Config Switch2(S9) Boot_Config Boot up InterfaceSelect 0 No auth.(Default) 1 Auth is required We'll start with a quick review of how Wi-Fi has changed over the years. In fact, the earliest generation of 802.11 standard can be traced back to 1997, when the wireless speed is very low, only 2Mbps, it is an original standard of the first generation . With the introduction of 802.11b in 1999, the physical layer speed was increased to 11Mbps and there were very few commercial applications. At that time, Wi-Fi was still far away from people's lives In 2003, the third generation of the standard, 802.11a/ g. Laptop began to configure wireless network card and home wireless router appeared in large quantity . Wi-fi comes into ordinary family. Skype/EMAIL/Teams：sales@wallystech.com WEB:https://www.wallystech.com/ 评论 未登录 评论 最新评论 暂无评论。。
最新评论
暂无评论。。